Author Archive | Admin

Kevin Rottinghaus Profile Picture

Open House – Tuesday Nov, 13th

Join us for an Open House on Tuesday, Nov 13th, 9am-7pm Location: 735 E. Remington rd, Schaumburg, IL RSVP: 9AM – Keynote Presentation: Runner and Gating Fundamentals KEVIN ROTTINGHAUS, BEAUMONT A runner can have a significant influence on plastic temperature and pressure distribution, crystallinity, and orientation of the material in the cavity. This presentation […]

Continue Reading

Training Classes Announced for September 2018

Operation and Processing Fundamentals Course This course is designed to provide the beginner to the intermediate processor with a good foundation to understand the individual functions of the machine and basic auxiliaries that make up the plastic injection molding system. When: September 11-12th, 2018 (9:00 am to 4:00 pm) Where: Plustech Inc. 735 E Remington […]

Continue Reading

“A key component of our success comes from the relationships we have built with a solid network of product partners, and Sodick Plustech, Inc. ranks among our strongest.”

Nutec Tooling Systems is a Plustech partner.  They recently included information on us in their newsletter, here is a blurb: “A key component of our success comes from the relationships we have built with a solid network of product partners, and Sodick Plustech, Inc. ranks among our strongest. Because we specialize in Press-side Automation, particularly Micro-Molding applications, we need, not just […]

Continue Reading

Omega purchases and implements a molding press that takes a different approach to injection molding

Problem:  Omega Plastics was recently challenged with a project that required high precision/very tight tolerances, a very expensive resin, along with requiring a very small shot size.  Their existing, traditional, molding equipment presented a serious concern, especially regarding the issue of material residence time. Solution:  Through diligent research, Omega’s Molding Specialists’ discovered a piece of […]

Continue Reading
Metal 3D Printer, OPM250

Sodick Sets the Stage at NPE2018 with New Additive and Injection Molding Technology in Booth W782

Schaumburg, IL – February 6, 2018 – During NPE2018, Plustech, Inc., Sodick’s IMM Division, will be introducing the OPM250, Metal 3D Printer along with four new injection molding machines models: the MS100 New Electric Horizontal Molding Machine, the LP20VRE Micro Vertical Molding Machine, the GL60A  Horizontal Molding Machine, and the GL30A-LP Micro Horizontal Molding Machine.  […]

Continue Reading
Isometric's two-stage Sodick presses run "lights-out" for two out of three shifts, thanks to extremely accurate and consistent process control.

Micromolder’s Business Rests On Four Key Technologies

The “four legs” that support Isometric Micro Molding are micro molds, micro injection molding, micro automation, and CT scanning.   When a moldmaker serving injection molders of medical parts decided to get into micromolding itself, the first priority was to obtain the right equipment. For Isometric Micro Molding, Inc., New Richmond, Wis., that meant buying the right […]

Continue Reading
Plustech Open House

See Plustech Speak at IMTECH 2017

Schaumburg, IL – July 14, 2017 – Plustech, Inc., the North American Branch of Sodick’s IMM Division, has announced their participation in IMTECH 2017.  The event, which is held August 1st-3rd, 2017 at the Chicago Marriott Oak Brook in Oak Brook, IL, will include 36 technical sessions, industry exhibits, and plant tours. Kohei Shinohara, of […]

Continue Reading