Case Studies
Case Studies
Offering the Proprietary Technology to Challenge Your Applications
Sodick Plustech is committed to supporting our production machines in the field as we certainly understand that high-demand injection molding manufacturing requires up-time rather than down-time for our customers to be profitable and achieve a competitive edge toward productivity
| Image | Part (Material) | Description | Category |
 |
Micro Bobbin (POM) |
Part Weight 0.00015g Machine: TR10EH2 | Micro Electronics |
 |
Resorbable Tube (PLA) |
Bio-Resorbable 0.0118" wall-thickness Machine: LD30EH2 | Micro Medical |
 |
Fine-Pitch Connector (LCP) |
60mm/sec Filling Speed Machine: LD20EH2 | Micro Electronics |
 |
0.0035" Wall Thick Tube (LSR) |
Mold Trial by Matrix Tooling Machine: LD20EH2 | Thermoplastic Medical |
 |
Housing (Implantable TPU) |
0.5mm/sec low speed filling Machine: LD20EH2 | Micro Medical |
 |
Thin-wall Part (PEEK) |
PEEK 0.3mm x 15mm Machine: HSP100EH2 | Micro Medical |
 |
PPS Housing (PPS) |
45% Outgas Reduction Machine: LA100 | Thermoplastic Automotive |
 |
Fluid Nozzle (PBT) |
Remove void by fine-tuning holding Machine: TR20EH2 | Thermoplastic Automotive |
 |
Optic Lens (COP) |
High Resolution Speed/Pressure Control Machine: LA60 | Thermoplastic Optics |
 |
Pick-up Lens Holder (PPS GF65) |
Wear Resistance - 1/8 reduction Cost Machine: TR20EH2 | Thermoplastic Electronics |
 |
Silicone Ear Plug (LSR) |
Intentional 95% Short Shot Consistency Data Machine: LS40R | Silicone Medical |
 |
Hard Silicone Lens (Silicone Optical Resin) |
Ideal Equipment by "Dow Corning" Bulletin Machine: LS40R | Silicone Optics |
 |
Connector (PBT) |
Small Runner System (Ratio 16%) Machine: LA60 | Thermoplastic Electronics |
 |
Connector (PBT) |
Minimum Machine Difference Machine: TR100EH2 | Thermoplastic Electronics |
 |
Thin-Wall Case (PPS) |
PPS 0.010" x 3.0" length Machine: TR180EH2 | Thermoplastic Electronics |
 |
Light Guide (Polycarbonate) |
0.285mm thin-wall using compression Machine: LA60 | Thermoplastic Optics |
 |
Cell Phone Body (PPA GF55) |
Less Gas (1/2 Sulfur) Machine: TR140EH2 | Thermoplastic Electronics |
 |
SD Card (Polycarbonate) |
1500mm/sec for 0.17mm Wall Thickness Machine: HSP40EH2 | Thermoplastic Electronics |
 |
Duck Bill Valve (LSR) |
Flash Free Cold-Deck Molding Machine: LS40R | Silicone Medical |
 |
Port (LSR) |
Low Speed / Pressure Molding Machine: HSP40EH2 | Silicone Medical |
SOLUTIONS TO YOUR PROBLEM
Case Studies
Some of Sodick Plustech Success Stories by Offering the Proprietary Technology to Challenge Your Applications
Video Galleries
Take a look at video galleries including Sodick Plustech ultra-precision molding in action.
FAQ
Frequently Asked Questions about Sodick Plustech & our Technologies.