OFFERING PROPRIETARY TECHNOLOGY TO SOLVE YOUR MOST CHALLENGING APPLICATIONS
Sodick is committed to supporting our production machines in the field. We understand the highly demanding injection molding industry requires reduced down-time for our customers to be profitable and achieve a competitive edge through productivity.
| Image | Part (Material) | Description & Machine | Category |
|---|---|---|---|
 | Wrench (Carbon Fiber) | Long Carbon Fiber 8mm - 40% Filled Machine: GL60 | Thermoplastics Automotive |
 | Camera Shutter (POM) | 0.08mm Super Thin Wall filling Machine: LP20EH2 | Thermoplastic Electronics |
 | Light Guide (PMMA) | 0.25mm thin-wall using compression Machine: HSP220EH3 | Thermoplastic Optics |
 | Micro Bobbin (POM) | Part Weight 0.00015g Machine: TR10EH2 | Micro Electronics |
 | Thin-wall Part (PEEK) | PEEK 0.3mm x 15mm Machine: HSP100EH2 | Micro Medical |
 | Resorbable Device (PLA) | Bio-Resorbable 0.015 gram Machine: LP20EH3 | Micro Medical |
 | Fine-Pitch Connector (LCP) | 60mm/sec Filling Speed Machine: LD20EH2 | Micro Electronics |
 | 0.0035 Wall Thick Tube (LSR) | Mold Trial by Matrix Tooling Machine: LD20EH2 | Thermoplastic Medical |
 | PPS Housing (PPS) | 45% Outgas Reduction Machine: LA100 | Thermoplastic Automotive |
 | Optic Lens (COP) | High Resolution Speed/Pressure Control Machine: LA60 | Thermoplastic Optics |
 | PPS GF65Holder (PPS GF65) | Wear Resistance - 1/8 reduction Cost Machine: TR20EH2 | Thermoplastic Electronics |
 | Implantable LSR device (LSR) | Intentional 95% Short Shot Consistency Data Machine: LS20EHV | Silicone Medical |
 | Hard Silicone Lens (Silicone Optical Resin) | Ideal Equipment by Dow Corning Bulletin Machine: LS40R | Silicone Optics |
 | Connector (PBT) | Small Runner System (Ratio 16%) Machine: LA60 | Thermoplastic Electronics |
 | Connector (PBT) | Minimum Machine Difference Machine: TR100EH2 | Thermoplastic Automotive |
 | B-to-B Micro Connector (LCP) | 6.4mg micro connector with 0.045 sec fill time Machine: LP20EH3 | Thermoplastic Electronics |
 | Cell Phone Body (PPA GF55) | Less Gas (1/2 Sulfur) Machine: TR140EH2 | Thermoplastic Electronics |
 | SD Card (Polycarbonate) | 1500mm/sec for 0.17mm Wall Thickness Machine: LA100HSP | Thermoplastic Electronics |
 | Thin Wall Bushing (PSU) | RADEL(R)10mg micro parts with micro runner system Machine: GL30LP | Thermoplastic Medical |
 | Molded Interconnected Device (LCP) | Next generation electronics device Machine: LP20EH3 | Thermoplastic Electronics |
 | Coil Bobbin (PA9T)(PMMA) | 2 Shot - coil overmolding Machine: HC03VRE x 2 | Thermoplastic Electronics |
 | Coil Washer (PA9T) | 0.057cc Total Shot size Machine: LP20EH2 | Thermoplastic Electronics |
 | Funnel Tip (PEEK) | 0.008" Wall PEEK Parts with Melt Flipper(R) Machine: LP20EH2 | Thermoplastic Medical |
 | Testing (PBT) | Actual Resin Temperature Machine: Any | Thermoplastic All |
 | Testing (PES) | Outgas study for PES Machine: Any | Thermoplastic All |
